Binatone Twin XD1220 Telephone User Manual


 
10
MAKING CALLS
Making calls
1. Press the CALL button [4] and wait for dial tone. The LCD [2] will light and show the
“EXT” symbol.
2. Dial a number using the dialing buttons [11].
3. Start conversation when the second party answers
4. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12]. The “EXT” symbol will disappear from the LCD [2].
Preliminary dialing
The preliminary dialing feature allows you to enter and edit the number entered just
before calling.
1. In standby mode (i.e. when the phone is not in use) enter a number (no more than
25 digits). If the number consists of more than 12 digits, the LCD [2] will show the
last 12 digits.
2. If you entered a wrong digit, you can erase it by pressing the CANCEL button [9].
3. If you want to delete all the entered digits, press and hold the CANCEL button [9] for
3 seconds. Your phone will switch to the standby mode.
4. Press the CALL button [4]. The phone will start dialing the number you entered.
5. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].