Filter
Top Products
12
Making calls in the speakerphone mode
1. Press the CALL button [4].
2. Press the
button [3].
3. When the dial tone is heard, dial a number.
To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].
Redialing
Your phone stores in its memory 10 last dialed numbers (no more than 25 digits
each). You can select any one of them to be redialed.
1. Press the button [5]. The LCD [2] will show the last dialed number.
2. Using the [5] or [6] buttons, select the number you need.
3. Press OK button [7]. If there is an entry with this number in the phone book, the LCD
[2] will display the name for that entry and if this is not a case, the LCD will show only
the number.
4. If the number you need is not in the last dialed numbers list, press the CANCEL [9] to
exit this menu item.
5. To dial the selected number, press the CALL button [4] when the number you need is
on LCD [2].
6. To hang up, press the CALL button [4] once again or simply place the handset [1] on
the base unit [12].
Making your conversation mute
During a call, you can use the mute function so that another party cannot hear you.
When using the mute function, you can hear the other party.
1. During conversation, press the MUTE button [8]. LCD [2] will show the corresponding
icon.
2. Press the MUTE button [8] once again to resume the normal conversation mode.
FLASH function
The FLASH button [10] may be used to finish the conversation immediately and to
start dialing a new number. If the phone is connected to a PBX, you can use this button
according to the PBX Operating instructions.
Pause
To insert a pause during dialing (e.g. when dialing a long distance number stored in
the phone book), press and hold the button [5] for 3 seconds.
Adjusting the handset speaker or speakerphone
volume during conversation
During conversation, you can use the [5] or [6] buttons to adjust the speaker
volume. LCD will show: “EAR VOL n” (where n – volume level, 1 to 5).