Filter
Top Products
Troubleshooting continue...
The caller may have withheld their number by
dialing 141. Or they may be calling from a network
that does not transmit the Caller Display (for
example, it may be an international call).
Be sure to wait until the second ring before
answering.
Answering Machine
“The machine won’t The machine’s memory may be full. You need to
record any delete enough recorded messages to free at least
messages” one minute recording time. Or you can delete all
recorded messages to make room for new ones
Make sure the machine is switched on - the
MESSAGE light should be on.
Make sure you have not selected OGM2 - with
OGM2 selected, callers cannot leave messages
(see page 20).
“Remote operation Make sure you are using the correct remote
doesn’t work.” security code.
Check that you are using a suitable tone-dialling
phone. Some cordless or mobile phones do not
generate continuous tones and so are not ideal for
remote operation.
Don’t leave more than 10 seconds between key
presses; otherwise, your call will be cut off.
Using your Caprice 600 on a PBX
“Last Number Redial When you first make a call, try pressing the REDIAL/
and/or memory PAUSE button for a pause between the outside line
dialing don’t work access digit (e.g. 9) and the telephone number.
on a PBX. You should later be able to redial the number.
When storing numbers in memory, you can include
the outside line access digit (e.g. 9) with each
number.
30
Binatone Help Line - 0845 345 9677Binatone Help Line - 0845 345 9677
Binatone Help Line - 0845 345 9677Binatone Help Line - 0845 345 9677
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.