29
12. Troubleshooting
The Caprice 600 must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself - you could make the
problem worse and invalidate the Guarantee.
ALWAYS check you have followed the steps listed in Section 2 to
first that: install and set up your Caprice 600.
all connectors are firmly inserted in their sockets.
mains power is switched on at the socket.
Everyday use
“I cannot make or Make sure you’re using the telephone line cable
answer calls.” that was supplied with your Caprice 600. Other
telephone line cables might not work.
Switch off power at the mains socket, wait for a few
seconds and then switch back on. This may solve
the problem.
“The phone does Make sure you’re using the telephone line cable
not ring” that was supplied with your Caprice 600. Other
telephone line cables might not work.
Set the ringer volume to High, using the switch at
the back of the unit.
Check that the total REN value of all equipment
connected to your telephone line is not more than
4. Disconnect one or more telephones.
“The phone does Make sure you’re using the telephone line cable
not dial” that was supplied with your Caprice 600. Other
telephone line cables might not work.
“The Caller You need to subscribe to Caller Display service
Display feature from your local telephone company. Contact the
isn’t working.” local telephone company for details on how to
subscribe.
!
Binatone Help Line - 0845 345 9677Binatone Help Line - 0845 345 9677
Binatone Help Line - 0845 345 9677Binatone Help Line - 0845 345 9677
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.