Filter
Top Products
Binatone Help Line : 0845 345 9677 24
the new handset up a three-way conference
7. At the same time, on the base, press
the MENU/OK button to see
"PHONEBOOK"
8. Press the UP
button tweice to see
"REGISTRATION"
4. Press the DOWN
button to select a base number (BASE 1, 2,3 or 4)
5. Press
the MENU/OK button to see "PIN ?"
Key in the 4 digit PIN code for the base - the CC2300 default PIN code is 0000
6. Press the MENU/OK button to confirm, and the
display will flash
"SEARCHING 1" (or 2,3,4)
9. Press the MENU/OK button to see
"SEARCHING" flash on base display
After a short delay, if the registration is successful, there will be a
confirmation beep, and the Handset display will go back to idle mode with
number shown (e.g. HS1, HS2). The base display will also go back to
To de-register a handset using the CC2300 base menu
With the base in idle mode:
1. Press the MENU/OK button to see
"PHONEBOOK"
2 .Press the DOWN button twice to see
"SETTINGS"
3. Press the MENU/OK button to see
"DELETE HS"
4. Press the MENU/OK button to see
" HS 1 " (or 2,3, 4)
5. Press the MENU/OK button to confirm, and the selected handset will be
*
Press the PHONEBOOK/BACK button to return to the previous menu
will show "UNREGISTERED".)
To de-register a handset
You may need to do this if you need to replace a faulty handset. Call the Binatone help
line if you need more advice.
at any time.
de-registered. (The display on the handset that has been deleted
Press UP or DOWN button to select the handset you want to de-register.
Note: Handsets can also be de-registered using another cordless handset,
as described in the cordless handset user guide.
idle mode.