Filter
Top Products
Step 3. Select the NAT tab, then add a static 1-to-1 NAT. The Translate to IP address is the
public WAN IP address and then select HIPT-B1 from the Install on Gateway pull down menu as
shown in Figure 49 and click OK.
Figure 49: NAT Properties of B1 LSP Static NAT
TC; Reviewed:
PV 04/24/2006
Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
58 of 61
HT3-LSP-VF.doc