Filter
Top Products
6.2.5. Enterprise Customer Checkpoint Firewall Configuration
The firewall at the enterprise sites must be configured to provide static 1-to-1 NAT for LSP to
Avaya Communication Manager connectivity. The following example in Figure 47 is shown for
Checkpoint Firewall HIPT-B1 located in enterprise site B1. The Group HIPT-B1_eth4 is made
up of several defined networks: one for the outside Checkpoint address (142.16.53.0), one for the
B1 Private Data LAN (10.4.11.0).
Step 1. From Checkpoint Smart Dashboard application, Select Network Objects Æ Checkpoint
Æ HIPT-B1Æ Topology as shown in Figure 47.
A static 1-to-1 NAT will be added to the HIPT-B1_eth4 topology in steps 2-4.
Figure 47: Checkpoint Topology Configuration
TC; Reviewed:
PV 04/24/2006
Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
56 of 61
HT3-LSP-VF.doc