Filter
Top Products
Step 2. Use the “change ip-network-region <region number>” command to add the LSP Native
IP Address to the appropriate Network Region shown in Figure 8. Submit the changes.
Figure 8
Step 3. Use the “change lsp” command to add the static 1-to-1 LSP IP address configured in the
NetScreen-25 Firewall (Figure 20) to the LSP form shown in Figure 9. Submit the changes.
Figure 9
TC; Reviewed:
PV 04/24/2006
Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
17 of 61
HT3-LSP-VF.doc