Filter
Top Products
Step 2. Use the “change ip-network-region <region number>” command to add the LSP Native
IP Address to the appropriate Network Region shown in Figure 30. Submit the changes.
Figure 30
Step 3. Use the “change lsp” command to add the static 1-to-1 LSP IP address configured in the
Checkpoint Firewall (Figure 49) to the LSP form shown in Figure 31. Submit the changes.
Figure 31
TC; Reviewed:
PV 04/24/2006
Avaya – Proprietary
Use as authorized only pursuant to your signed agreement or
Avaya policy. No other disclosure is permitted or authorized.
39 of 61
HT3-LSP-VF.doc