Filter
Top Products
Multiuser
298
After a forward all programmed key is pressed:
• If all accounts are already set to forward calls to the key's target, then
Call Forward is disabled for all accounts.
• If not, Call Forward is activated for all accounts using the key's target.
For both single and all keys, you can treat the key as a toggle. If no Call
Forward or DND operations are selected, pressing the key switches one
or all accounts between forwarding to the key's target and not forwarding
states.
The Call Forward mode and target for each account is persistent. If you
restart the IP Deskphone or logout and login, the Call Forward state is
retained.
Presence
Selecting the Presence command from the Services menu prompts you
to specify which presence state of the account should be modified. The
option all lets you set all accounts to the same presence in one operation.
If you select a single account, then the current state of the account is
displayed and you are prompted whether it should be changed. You are
then prompted to enter the new presence state. The new presence state
is applied after it is confirmed.
If the option is selected, no current state is displayed, and you are
immediately prompted to select the new state. The new state is then
applied to all registered accounts.
When using a programmed Presence feature key, the account that is
impacted by the Presence feature key is determined after the feature key
is configured.
After a single-account Presence programmed key is pressed:
• If the account is already set to the programmed presence state, then
the account is set back to the Connected presence state.
• If not, the account is set to the programmed presence state.