Filter
Top Products
6 Maintaining Your System
56 Backup and Restore
Quick Reference Guide
Backup Programming–Manual (#124)
Use this feature to manually back up all the programming (except the system
date, day, and time) to a Backup/Restore PC Card.
To begin a manual backup of system settings:
1 Verify that only one Backup/Restore Card is in the processor module.
2 Press f00ss#124 at extension
10 or 11.
If there is a problem, a message appears (see Chapter 7, “If Something
Doesn’t Work” for explanations and corrective actions).
If there is no problem, the display instructs you to press
e to begin the
backup.
3 Press e.
A status message is displayed indicating that a backup is in progress, and
within 30 seconds, a message appears indicating the result.
If the backup failed, an error message appears (see Chapter 7, “If
Something Doesn’t Work,” for explanations and corrective actions).
•
Backup Failed:Check Card
•
Backup Failed:SystemBusy
4 Exit programming mode.