Filter
Top Products
4 Programming System Features
42 Dialing Restrictions and Permissions
Quick Reference Guide
Disallowed List Assignments (#405)
Use this feature to assign up to eight Disallowed Phone Number Lists to specific
extensions.
You must use Disallowed Phone Number Lists (#404) to create the lists of
disallowed telephone numbers before you use this procedure.
To assign Disallowed Phone Number Lists to an extension:
1 Press f00ss#405 at extension
10 or 11.
2 Enter the number of the extension to be programmed.
3 Enter the list number (1—8).
4 To assign or unassign the list, press D until the appropriate value
appears.
• 1 = Assigned to extension
• 2 = Not Assigned to extension (the factory setting)
✔
5 Do one of the following:
• To assign or unassign another list for this extension, press
n or
p until the list number appears on the display. Then repeat Step 4.
• To program another extension, press
N + P, and
begin at Step 2.
6 Select another procedure, or exit programming mode.
Line Access Restriction (#302)
Use this feature to restrict an extension from receiving and/or making outside
calls on a specific line. For example, you may want a secretary to answer calls on
a manager’s line, but not to make any outgoing calls on the line; in this case you
can assign the manager’s line to the secretary’s extension and restrict it to In
Only.
This procedure is the most extreme way to restrict dialing. For example, an
extension with a line set to In Only or No Access cannot select the line to dial
out–even for numbers on the Emergency Phone Number List (#406).