Filter
Top Products
5 Programming Telephone Features
Extension Name Display 49
Quick Reference Guide
Extension Name Display
You can assign a name to an extension: up to 20 characters long on PARTNER
telephones or up to 12 characters long on MLS telephones. Then, when that
extension is used to make an intercom, group, or transferred call, the name
appears on the system display telephone receiving the call. Similarly, users
receiving a transfer return call see the name of the person assigned to the
extension that did not answer the transferred call. The following table shows the
valid character entries for Extension Name Display.
To assign a name to an extension:
1 Press f00ssc at extension
10 or 11.
2 Enter the number of the extension to be programmed.
Valid Character Entries
Letters Numbers
A = 21 N = 62 blank = 11
B = 22 O = 63 0 = 00
C = 23 P = 71 1 = 10
D = 31 Q = 72 2 = 20
E = 32 R = 73 3 = 30
F = 33 S = 74 4 = 40
G = 41 T = 81 5 = 50
H = 42 U = 82 6 = 60
I = 43 V = 83 7 = 70
J = 51 W = 91 8 = 80
K = 52 X = 92 9 = 90
L = 53 Y = 93
M = 61 Z = 94