Avaya 5410 IP Phone User Manual


 
Basic Call Handling Features
5410/2410 Phone User Guide Page 9
IP Office Issue 3f (7th October 2005)
Clearing a Call
To clear an established call either:
1. Replace the handset
or
2. Press
Drop. You will hear dial tone, unless you are in ‘call center mode’ of working when you
will then hear silence.
Headset Working
When a headset is to be used on your phone, it must be plugged in to the headset socket on the base of
your phone. To activate the headset and switch off the handset, press
Headset. The lamp beside the
button is illuminated when headset working is activated.
To answer an incoming call:
1. Press the call appearance key
next to the flashing bell icon ( ):
To clear a headset call:
1. Press
Drop.
To manually make a call:
1. Dial the number (remember to include the required access code (for example, 9) for an outside
line) and listen to the progress of the call.
To automatically make a call:
Do any of the following:
Press Redial and select from (up to) one of the last ten numbers that you dialed by pressing
the associated a call appearance key. The call is made automatically for you
or
Access the Call Log and initiate a call to a specific entry. See Making Calls from the Call Log.
or
Access the Speed Dial List in your personal directory and initiate a call to a specific entry. See
Dialing a Speed Dial Number.
When the call is answered, speak to the called party.