2410user
5410/2410 Phone User Guide Page 6
IP Office Issue 3f (7th October 2005)
Call Appearance Keys
Normally, the first page of the main call handling screen contains three keys set as 'call appearance'
keys. These are allocated to you by your System Administrator and are indicated as a=, b= and c=.
Your System Administrator can change a call appearance key with:
• A Bridged Appearance
A bridged appearance key matches the status and operation of the Call Appearance Key on a
pre-defined colleague’s telephone. Hence, you can pick-up, make and receive calls on behalf of
your colleague.
• A Line Appearance
An IP Office exchange line (but not IP lines) can be allocated to you such that the status of that
line is displayed and you can use the line appearance key to make and receive calls.
• Call Coverage Appearance
A call coverage appearance key alerts you when a pre-defined colleague is receiving a call. The
covered user does not need to be using call appearance keys. Hence, you can pick-up calls on
behalf of your colleague.
• A System Feature
System Features, such as Abbreviated Dial (that automatically dials a frequently used number)
can be set against key and/or dial pad digits. See Overview of the Function Keys.
All of the above can only be allocated to you by your System Administrator.
For details of Bridged, Line and Call Coverage Appearance Keys set-up and their operation, refer the IP
Office Key and Lamp Operation manual.
CAUTIONS:
1. Having more than two Call Appearance keys is very useful. When holding a call you can
answer/make another call and then switch between calls or transfer or conference. If you are set
to receive call waiting indication, the waiting call is shown against the next call appearance key.
2. Although the System Administrator can replace the Call Appearance Keys with other functions,
this would severely restrict the use of features such as conference and transfer. For this reason
it is strongly recommended that all Call Appearance keys remain at their default settings.