Avaya 5410 IP Phone User Manual


 
Using the Call Log
5410/2410 Phone User Guide Page 19
IP Office Issue 3f (7th October 2005)
Deleting a Call Log Entry
1. Press Log. If Log is not shown, press any Soft Key.
2. At default, Missed calls are displayed first. You can select from InAns or Outgo. Alternatively,
press More and select All to display all three options. To return to Missed or InAns or Outg,
press Back and make your selection.
3. Press
and to display different pages of log entries.
4. When you locate the entry you want to call, press the
or key next to the entry.
5. Press Delete. The entry is deleted from the Call Log and the details of the next call are shown.
6. Press Done to return to the main screen
To exit the logged call details and return to the main call log screen press Done.
To exit the call log and return to the call handling screen press Exit.
Erasing All Logged Calls
Loss of power to the phone will cause all call log entries to be deleted. In addition you can manually
select to erase the call log, see Default Phone/Erase All Settings.
Setting Which Calls are Logged
Caution: If you change these settings, any call details already in the call log that no longer match the
selection are deleted.
1. Press
Exit to exit any other mode, then press any of the keys below the display.
2. Press Option.
3. Press
Log Setup. A menu showing Answered, Un-Answered and Outgoing, with their
current settings, is displayed. .
4. To toggle a particular setting between Yes and No, press the
key next to it.
Alternatively, press the
key next to a call type to underline its current setting and then press
Yes/No to change the value of the currently underlined setting.
5. Do one of the following: Note: If you press the Save after changing the settings, any existing call
log entries that do not match the call types selected are deleted from the call log.
To save the settings and return to the options menu, press Save. You will hear a
confirmation tone.
To return to the Options menu without saving any changes, press Cancel.
To return to the call handling screen without saving any changes, press Exit.