Configuring custom settings
149
Configuring custom settings
This chapter provides information about the following topics:
• “Programmable keys” on page 149
• “Assigning functions to programmable keys” on page 150
• “Erasing a programmable key” on page 152
• “Restoring the default settings for programmable keys” on page 153
• “Configuring speed dial keys” on page 153
• “Querying programmable keys” on page 155
• “Using the relay option” on page 156
• “Twinning” on page 158
• “Configuring privacy settings” on page 160
• “Audio Codecs” on page 163
Programmable keys
You can configure the programmable keys on the IP Deskphone or on a
Key Expansion Module (KEM) to activate specific features. When you
configure a programmable key, it acts as a short cut so that you do not
need to enter a feature codes in order to activate the feature.
If a feature is programmed on a button, the status of the button will be
updated with an active/idle state, depending of the status of that feature.
This is supported by the following features:
• Call Forward All
• Twinning
•Private Call
• Automatic Callback
• Do Not Disturb
• Voicemail On
