Filter
Top Products
An empty battery icon indicates the batteries need to be recharged. Place the handset on the charger
to recharge the batteries. A handset reaching a very low battery voltage level will go into sleep mode,
displaying LOW BATT on the LCD screen.
Get into the habit of putting the handset on the charger to charge when the handset is not being used.
This will ensure the handset is always fully charged.
NOTE: Due to unique characteristics of NiMH batteries, most notably its extensive life cycle and high
safety rating, the battery icon on the handset tends to show less than full capacity when a fully charged
battery is inserted into the handset. Also, the fi rst few times using the phone, please let the battery
drain completely before placing on the charger. This will ensure a longer talk/standby time for the
handset.
To turn the phone on, press and hold Off / Exit when the phone is off the charger.
To turn the phone off, press and hold Off / Exit or return the handset to the charger.
The handset will automatically turn itself off once the phone is placed on the charger.
System Requirements:
In order to use the phone, the computer must meet the following requirements:
• PC running Windows® 2000 or XP
• 400 MHz processor or faster
• At least 128MB RAM
• At least 1 free USB port on the computer
• Broadband or dial-up Internet connection
Charging the handset:
Turning handset on and off:
Ensuring phone
is working properly:
Step 1: Getting the PC ready
Insert the installation CD into the PC’s CD ROM (or DVD ROM) drive.
The installation program will start automatically.
Follow the instructions on the screen.
Click the QUIT button when fi nished with the installation.
Remove the installation CD from the PC’s CD or DVD ROM drive.
1.
2.
3.
4.
5.
If the installation does not start automatically:
- Click on START and then select RUN.
- Enter EXPLORER and navigate to the CD or DVD ROM drive.
- Double-click on SETUPWIZARD.EXE.
9