Filter
Top Products
7
Push To Talk (PTT) Button (4):
Pressing and holding this button will allow you to speak to any transceiver that is set
to the same channel and privacy code setting as yours. Hold the transceiver
approximately 1 to 2 inches from your face as you speak into the built in microphone
(9). After you have finished speaking, release the PTT button to allow the reception
of incoming signals. It is not possible to transmit and receive at the same time. The
red transmit LED indicator located on the right side of the LCD Panel (8) will light
while the PTT button is pressed.
Releasing the button allows the unit to revert to standby mode. When receiving an
incoming signal, the green receive LED indicator on the left side of the LCD Panel (8)
will light.
The PTT button can also be used as a two-way call ringer. Pressing the button twice
quickly will call another party on the same channel. The word CALL and the transmit
icon will appear in the display. The user selected call will sound.
Volume Control (10 and 11):
In the standby mode, adjust the volume to a comfortable level by presing the Up (10)
to increase the volume level and the Down (11) to decrease the volume level.
Up Button (10):
In the standby mode, pressing this briefly will increase the volume. In the function
edit mode, pressing the button briefly will shift from the current option in each submenu
to next option in the same submenu.
Pressing the button for more than 1.5 seconds allows navigation at a more rapid
rate. In the standby mode the volume will increase rapidly. In the function mode,
different menus can be rapidly accessed.
Down Button (11):
In the standby mode, pressing this briefly will decrease the volume. In the function
edit mode, pressing the button briefly will shift from the current option in each submenu
to next previous option in the same submenu.
Pressing the button for more than 1.5 seconds allows navigation at a more rapid
rate. In the standby mode the volume will decrease rapidly. In the function mode,
different menus can be rapidly accessed.