Filter
Top Products
To turn off the dual watch feature in the standby mode, simply press the Function
Button (12) once.
VOX SELECTION MODE
The Voice Activated Transmission (VOX) function allows your voice to activate signal
transmission automatically when the FR1438-2 is used with a hands free microphone/
headset (FRS-BHST). It also allows hands free use when a microphone/headset is
not being used without having to use the PTT Button (4). When in the VOX mode a
short beep will sound after the termination of any VOX generated transmission. To
access the VOX Selection menu:
1. Press the Function Button (12) until the VOX icon blinks and UO appears in the
LCD Panel (8).
2. Press the Up Button (10) or the Down Button (11) to select from high, low or off.
The high or low setting determines VOX response sensitivity.
3. Press the Enter Button (13) to confirm your selection.
VOX RECOVERY TIME SELECTION MODE
This allows the setting of the transmit delay after you have finished speaking.
To access the VOX Recovery Time Selection menu:
1. Press the Function Button (12) until Udt appears in the LCD Panel (8) with
the VOX icon blinking.
2.Press the Up Button (10) or the Down Button (11) to select from the 5, 3, 2
or 1 second setting. This setting determines the delay time between
transmitting and receiving.
3.Press the Enter Button (13) to confirm your selection.
NOTE: You may need to try different VOX time settings to determine
the best value to suit your speaking habits.
To turn off the VOX feature, enter the VOX selection mode and
then select OFF.
AUTO KEY LOCK SELECTION MODE
This feature prevents accidental channel change and disturbance to the preferred
settings of the FR1438-2. The Auto Key Lock feature temporarily disables the Up,
Down and Enter Buttons. To access the Auto Key Lock Selection menu:
1. Press the Function Button (12) until the auto lock icon blinks and ALO
appears in the LCD panel (8).
10