Filter
Top Products
Charging the FR1438-2:
Insert the charging transformer into a household electrical outlet and connect its
power jack to the socket on the rear of the charging stand. Simply placing the unit
into the charging stand will begin the charging process. The red LED on the front of
the charging transformer serves as a charge indicator. The charging stand will
charge two units simultaneously. Approximately 12 – 16 hours are required to fully
charge the batteries. Remember to turn your FR1438-2 OFF before placing it into
the charging stand.
Caution: The charging stand in your kit is intended for use with the supplied
batteries. Do not attempt to recharge any other batteries with the
charging stand.
Controls:
Power On/Off (13):
Press and hold this button for two seconds to turn the unit on. A short confirming
melody will sound. To turn the unit off, press and hold the button for a two-second
period. A short tone will sound before the unit shuts off.
Enter Button (13):
This button is also used to confirm options for operating modes during the function
edit mode. A momentary press of this button will convert the display of the CTCSS
subcode from a frequency to a number or number to a frequency for two seconds.
6
TRANSFORMER
CONNECTOR
RED LED
CHARGING
INDICATOR
CHARGING
STAND
CHARGING
TRANSFORMER