Filter
Top Products
30
Operation
Headset operation
Answering a call on the headset
When the headset base is plugged into the telephone wall jack
(installation option 1 or 2):
Press ON/OFF on the headset.
When the headset base is connected to a multiple line or
digital business corded telephone (installation option 3):
Lift the corded handset from the telephone cradle.
Press ON/OFF on the headset at any time to switch to the headset.
The handset must be away from the cradle (not hung up) until you
are ready to end your call.
NOTE: The headset base and headset do not have an external ringer. When
you receive calls, the headset earpiece plays a ring tone only heard through the
earpiece. If you have telephones connected to the same telephone line as the
headset base, you can rely on the ringers of those telephones to alert you to
incoming calls.
•
1.
2.
3.