Filter
Top Products
29
Headset operation
Making a call
Using the headset base as a stand-alone product
(installation option 2):
In order to make calls, you need to have a telephone which is
already plugged into the same telephone line.
When the headset base is plugged into the telephone wall
jack (installation option 1 or 2):
You must select NO LIFTER MODE on the headset base (see page 11).
Follow the instructions in your telephone user's manual for
making calls.
Press ON/OFF on the headset at any time to join the call.
After you join the call on the headset, you can hang up the
telephone and continue the call on the headset.
When the headset base is connected to a multiple line or
digital business corded telephone (installation option 3):
You must select LIFTER MODE on the headset base (see page 11).
Lift the corded handset from the telephone cradle.
Follow the instructions in your telephone user's manual for
making calls.
Press ON/OFF on the headset at any time to switch to the headset.
The handset must be out of the cradle (not hung up) until you are
ready to end your call.
•
1.
2.
3.
1.
2.
3.
4.
Operation