Filter
Top Products
Troubleshooting
Troubleshooting
My remote dial
pad does not
react when I
receive a call.
• Make sure that the remote dial pad is
registered to the headset base.
• The remote dial pad may be too far from
the headset base. Move it closer to the
headset base within the operating range.
• The layout of your home or office might be
limiting the operating range. Try moving the
headset base to another location, preferably
on an upper floor.
• Charge the battery in the remote dial pad
for at least six hours. For optimum daily
performance, return the remote dial pad to
its charger when not in use.
• Other electronic products can cause
interference to your cordless phone. Try
installing your phone as far away from
these types of electronic devices as
possible: television sets, VCRs, or other
cordless telephones.
• Disconnect, and then re-install the battery.
Place the remote dial pad in the charger. Wait
for the remote dial pad to re-establish its
connection with the headset base. Allow up to
one minute for this to take place.
21
the Battery installation & charging section
(pages 4-5) of this user’s manual.
• Your remote dial pad might be
malfunctioning. Please refer to the Limited
warranty section (pages 35-38) of this
user’s manual for further instruction.