Filter
Top Products
Troubleshooting
Troubleshooting
19
• Make sure the power cord is securely
plugged into the remote dial pad charger,
and the remote dial pad is in the charger.
Plug the charger power adapter into a
different working electrical outlet not
controlled by a wall switch.
• Move the remote dial pad closer to the
headset base. You might have moved out
of range.
• Reset the headset base. Unplug the unit’s
electrical power. Wait for 15 seconds then
plug it back in. Follow the procedures on
pages 6-7 to register the remote dial pad
again.
• Other electronic products can cause
interference to your cordless phone. Try
installing your phone as far away from
these types of electronic devices as
possible: television sets, VCRs, or other
cordless telephones.
My remote
dial pad isn’t
performing
normally.
CONNECTING...
displays on my
remote dial pad.
• Ensure that the headset base is powered
up.
• Move the remote dial pad closer to the
headset base. You might have moved out
of range.
• If the other phones in your home or office
are having the same problem, the problem
is in your wiring or local service. Contact
your local telephone company (charges
may apply).