Filter
Top Products
21
Telephone operation
Call transfer using intercom
Use the intercom feature to transfer an outside
call from one handset to another. (This feature is
not available on model TL71108.)
Models TL71208/TL71308
1. During a conversation with an outside call,
press INT. The outside call is automatically
placed on hold and TRANSFER TO: is
displayed on the screen.
2. Enter a handset number. The screen will show
CALLING HANDSET X. The called handset will
ring, and its screen will show HANDSET Y IS
CALLING.
3. On the ringing handset, press PHONE/FLASH,
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
4. Press OFF/CLEAR on the calling handset
or place it in the telephone base or handset
charger to complete the transfer. The
calling handset’s screen will show CALL
TRANSFERED and the other handset will
automatically be connected to the outside
call.
NOTES:
1. Before the intercom call is
answered, you can cancel
the transfer and return to
the outside call by pressing
OFF/CLEAR, PHONE/
FLASH, or INT.
2. If the called handset does
not answer the intercom
call within 100 seconds,
or if the other handset
is in the directory or call
log mode, or if it is on a
call, or out of range, the
transferring handset will
show UNABLE TO CALL
TRY AGAIN on its screen
and will automatically
return to the outside call.
3. You can switch between
the intercom call and the
outside call by pressing
INT on the calling handset.
The display will change
between INTERCOM and
OUTSIDE CALL to indicate
which party is active.
4. You can end the intercom
call and return to the
outside call by pressing
PHONE/FLASH on the
transferring handset.