Filter
Top Products
Handset lifter installation
Getting started
The TL7100 lifter works with the TL7610/TL7611 DECT 6.0 cord-
less headset by using the TL7610/TL7611 base adapter to pro-
vide a complete communication solution for most corded tele-
phones. The lifter raises and lowers its switch hook presser to
answer, make and end phone calls. The ring detector provides an
incoming call indication through the cordless headset, so you can
answer calls even if you are away from the telephone base.
3
Connect the TL7610/TL7611 headset base
The cords have colored labels that guide you to plug them into
the correct headset base jacks. The back of the headset base
has color-coded dots above the jacks and the names of the jacks
on the rear bottom piece that correspond to the colored labels
on the cords.
If you subscribe to high-speed Internet service (DSL - digital
subscriber line) through your telephone line, you must install a
DSL filter between the telephone line cord and telephone wall
jack. The filter prevents noise and caller ID problems caused by
DSL interference. Contact your DSL service provider for more
information about DSL filters.
Power adapter
jack (green dot)
Curly handset
cord jack (light
blue dot)
Handset
lifter jack
(blue dot)
Wall jack
(red dot)
Base handset
jack (orange dot)