Filter
Top Products
Answering System Operation
31
Changing feature options
Menu features can be changed to customize how the
answering system operates. Press MENU repeatedly to
hear each feature. Press CHANGE when you hear the
feature you want to modify.
Feature options (Default settings underlined).
System announces: Feature description:
1.
MENU
3.
MENU
Or
Press until desired feature
is heard (see list at right).
Press until desired selection
is heard.
Press to set selection and
move to next menu option.
Press to set selection and
exit menu.
2.
CHANGE
“Announcement. Press PLAY or
press RECORD. To continue setup,
press MENU.”
Options: [record announcement]
“Remote access code. To change
the setting press CHANGE.”
Options: [enter 2-digit code] 19
“Message alert. To change the set-
ting press CHANGE.”
Options: On / Off
“Announcement only, record no
messages. To change the setting
press CHANGE.”
Options: On / Off
“Base ringer. To change the set-
ting press CHANGE.”
Options: On / Off
“Number of rings. To change the
setting press CHANGE.”
Options: 2 / 4 / 6 /Toll Saver
Press
REC/MEMO
to record you out-
going announcement (see page 29).
Press
STOP
to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 35).
When on, the telephone beeps every 10
seconds when you have new messages.
When on, callers hear an announcement
but cannot leave messages (see page 30).
Choose this option to turn the base ringer
on or off (does not affect handset).
Choose number of rings before the system
answers a call. When Toll Saver is active,
the system answers after 2 rings if you
have new messages, and after 4 rings if
you have no new messages.
NOTE:
Press and hold
CHANGE
to advance the remote access
code number by 10.
(Play/Stop)
91-000353-060-000_E5640 MK3B CIB_R2.qxd 2/13/1950 7:21 PM Page 31