Filter
Top Products
18
Telephone Operation
Handset settings
At the feature menu you can change settings to
customize how the telephone works.
Press MENU, then use the ^V buttons to scroll to
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press SELECT to select the highlighted item.
Press OFF at any time to cancel an operation, back up
to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level (1-6), or
turn the ringer off ( 0 ). Use the ^V buttons to hear
an example of each volume level, then press SELECT to
select the one you prefer.
NOTE:
The ringer volume level also determines the levels of ringing for
intercom calls (see page 16) and the paging tone when initiating the Handset
Locator feature (see page 13). If the handset ringer volume level is set to off
(0), that handset is silenced for all calls and paging.
Ringer volume can also be temporarily adjusted by
pressing VOLUME on the side of the handset during
incoming ringing.
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
tones. Use the ^V buttons to hear an example of
each ringer tone, then press SELECT to select the one
you prefer.
Key tone
The handset is factory programmed to beep at each key
press. Use the ^V buttons to select ON or OFF,
then press SELECT to save your preference.
NOTE:
If you select
OFF
, you will not hear a beep when you press
keys.
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
91-000353-060-000_E5640 MK3B CIB_R2.qxd 2/13/1950 7:21 PM Page 18