Filter
Top Products
41
Answering system operation
Message counter displays
The message counter usually displays the total
number of memos and incoming messages. See the
list below for explanations of other displays in this
counter.
Message counter displays
0 No messages.
0 (flashing) The clock needs to be set (page 36).
1-99 Total number of messages and memos, or
message number currently playing.
1-99 (flashing) Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
If the telephone loses power, after power
is restored, the number in the message
counter will flash to indicate the clock
needs to be set.
10-99 Current remote access code while setting
(page 38).
1-99 (counting) Elapsed time while recording a memo
(page 40) or announcement up to 90 sec-
onds (page 37).
99 (flashing) Memo recording time has exceeded the
maximum counter capacity of 99 seconds.
F (flashing) Memory is full. Messages must be deleted
before new messages can be received.
-- System is answering a call, being
accessed remotely, or the clock is being
set.
-- (flashing) System is being setup or initialized.
02, 04, 06, tS Current number of rings while setting
(page 38).
1-8 Displayed for two seconds while telephone
base speaker volume being adjusted.
HI, LO, OF Displayed for two seconds while telephone
base ringer volume being adjusted.
Message counter