AT&T 993 2-Line Telephone User Manual


 
39
One-touch operation (speed dial)
Store a number in one-touch
Press ENTER to enter the feature menu. The screen
displays ONE TOUCH.
Press ENTER. The screen displays PROGRAM.
Press ENTER. The cursor flashes on the screen.
Enter the phone number using the dial pad keys.
— OR —
Press (AUTO) REDIAL to copy the last number dialed
from this telephone to this one-touch location.
The screen will show the number as you enter it. The
first 16 characters appear on the second line and
the next eight on the third line. You can press to
backspace and delete previous characters, or to
move ahead and add one space. Each space counts as
one digit and appears on screen as -.
When finished entering the number, choose a one-touch
location:
Press the desired one-touch key. The screen displays
the number entered and stored.
— OR —
Press LOWER, then press the desired one-touch key.
The screen displays LOWER MEMORY, the number you
entered, and Has been stored.
NOTES:
While programming one-touch entry, press repeatedly until the
screen shows EXIT PROGRAM, then press ENTER to return to the
previous menu.
— OR —
Press and hold ENTER to return to idle mode.
You can store up to 24 digits in each one-touch location. If you try
to store more than 24 digits, the screen will briefly display Only 24
digits are allowed, and a low pitch (error) tone will sound.
1.
2.
3.
4.
5.
1.
2.
ONE TOUCH
PROGRAM
PROGRAM
12341 - 567
WAIT
LOWER MEMORY
12341- 567
Has been stored
One-touch (speed dial)