Filter
Top Products
TELEPHONE OPERATION
Automatic Line Selection
Automatic Line Selection is preset to be active. This means the system is
preset to select a line for you when you lift the handset or press S.
The system will automatically select a ringing line before an idle line, and
an idle line before the primary line. If both lines are idle or ringing, the
primary line is selected. If you have manually selected a line, the selection
is active for five seconds and overrides automatic selection.
When Automatic Line Selection is off,the primary line will be selected
unless you select a line manually.
Automatic Redial
This phone can automatically and repeatedly redial the last number you
called. Press L or l, then press A without lifting the
handset, pressing K or pressing h. You will hear the numbers
being dialed. When the call is answered, you must either lift the handset or
press K to talk.
If the called line is busy, the phone will redial every 40 seconds up to
10 times (timing begins when the phone is on hook).
To stop automatic redialing at any time, press A again. Lifting
the handset or pressing h or K will also cancel automatic redial.
NOTE: This feature works only when the handset is on hook.
Switching Between Lines During a Call
During a call on one line, you can make or answer a call on the other line
by pressing H. You can use the H and LINE buttons to switch back
and forth between calls as often as necessary.
Example: While using Line 1,Line 2 rings:
1 Press H to hold Line 1.
2 Press l to answer the other call.
3 Press L to hang up Line 2 and return
to your first call
— OR —
Press H to hold Line 2,and press L
to return to your first call.
15
972_00_1ATT BOOK 12/4/01 1:37 PM Page 15