Filter
Top Products
Telephone Feature Setup
At the handset, you can set up one feature at a time, or you can set up a
feature and then move on to set up another feature.
1 Make sure the phone is off ( is not
displayed).
2 Press U, then >, and use the softkey to
select SETUP.
3 Select DONE if needed to reach the feature
you want to set, then use the CHANGE
softkey to scroll through the options for
that feature.
4 Select DONE again when the desired choice
is displayed to save your selection and
move to the next feature.
When you have finished setting Telephone features, you can continue on to
set up Caller ID features. To exit Feature Setup, press U.
Dial Mode
If you have touch tone service, the phone will be
ready to use as soon as the battery is charged.
Change this setting only if you have dial pulse
(rotary) service. This setting affects both the
handset and the base.
Handset Ringer Off / Battery Save
When the Ringer is set to OFF, the handset stays
ready to use for up to 30 days before you have to
return it to the base for recharging. When the
Ringer is off, the Intercom/Handset Locator feature
does not work, and the screen does not display
incoming call information. However, the call
information is stored in the call history. When the
Ringer is on, the handset stays ready to use for up
to 15 days, and all features are active.
Handset Ringer
You can choose from four different handset Ringer
styles. Select DONE to choose a Ringer style.
FEATURE SETUP
8
DIAL MODE:PULSE
CHANGE DONE
DIAL MODE:TONE
CHANGE DONE
RINGER: OFF
CHANGE DONE
RING TYPE: 1
CHANGE DONE
RINGER: ON
CHANGE DONE
MENU
SETUP INTERCOM