Filter
Top Products
INSTALLATION
6
5 Mount the base on the wall. (WALL MOUNTING ONLY)
Hold the base so the mounting knobs on the standard wall jack
will fit into the holes on the bottom of the base. Slide the base
down onto the knobs until it locks into place.
6 Charge the handset battery.
Place the handset face up or face down in the base.
Charge the battery at least 12 hours the first time. After the first
charge, the battery will quick-charge in only six hours.
7 Check for dial tone.
After the batteries are charged, lift the handset and press P;
you should hear a dial tone.
8 Set up Telephone features.
See page 8.
9 Set up Caller ID features.
See page 9.
10 Set up Answering System features.
See pages 10–14.
11 Set up Caller Specific Outgoing Announcements and
Talking Caller ID.
See pages 15–18.
Standard
electrical outlet
Modular
telephone
jack
3 Connect the telephone line cord.
If you are wall mounting the phone, use the
short line cord and press the excess cord
into the groove on the bottom of the base.
4 Connect the
power cord.