Filter
Top Products
You can store up to 10 telephone numbers and names in memory using
the handset. Your entries will be saved in the event of a power failure. You
can dial memory/directory numbers from the handset or from the base.
When you receive a call from a number you’ve stored in memory, and you
subscribe to Caller ID service, the screen displays the name information as
you’ve stored it, not as the service sends it (see “Memory Match” on page
38 in CALLER ID OPERATION). You can also record announcements to be
played at the base when a call is received from a telephone number or call
type you program (see”Talking Caller ID Feature Setup” on page 15 in
FEATURE SETUP). Additionally, the phone alerts you to calls from priority
numbers you’ve stored in memory with a special Priority Ring.
Store a Number in Memory
1 Make sure the phone is off ( is not displayed).
2 Press U.
3 Use the softkey to select DIR.
4 Select MEM.
5 Select ADD.
6 Enter the number you want to store
(up to 24 digits)
— OR —
Select REDIAL (if available) to store the last
number dialed.
7 Select DONE.
8 Store a name with the number by
following the directions on page 26
— OR —
Select DONE if you don’t want to store a
name.
9 Enter a memory location from 01-10.
10 Select DONE.
TELEPHONE MEMORY/DIRECTORY
25
MENU
CALL-ID DIR
DIRECTORY
VIEW ADD
ENTER NUMBER:
REDIAL
ENTER NAME:
DONE