Filter
Top Products
Call Identification
41
AT&T 882 Manual
Making a Call from InLog
When you review the Incoming Call Log, you can dial any
number that appears on the display. If the phone number is out
of your area code, the phone will automatically dial a Ò1Ó
before dialing the phone number. You can also use the dial pad
to dial while you look at the InLog number.
Making a Call
1 Press the soft key below InLog.
2 Use until the number you want to dial is highlighted.
3 Press the soft key below Dial.
Using ADial when
Making an InLog
Call
1 Do not lift the handset or press SPEAKER.
2 Press the soft key below InLog.
3 Once the number is highlighted, press the soft key below
Dial. The label changes to ADial.
4 Press the soft key below ADial.
Removing a Call from InLog
There are two ways you can remove calls from the Incoming
Call Log. You can remove a specific call while reviewing the
log, or you can erase the entire InLog.
Removing a Call
1 Press the soft key below InLog.
2 Use until the number you want is highlighted.
3 Press the soft key below Remove when you are done.
If confirmation is ON you will see “Press YES to remove”.
Press the soft key below YES to confirm removal.
Removing Entire
InLog
1 Press the soft key below InLog.
2 Press the soft key below RmAll.
You will be asked to press “Yes” to confirm removal.
5