AT&T 882 Telephone User Manual


 
Operation
22
AT&T 882 Manual
ADial
ADial repeatedly redials a phone number. This feature is only
available when the handset is hung up and the speakerphone light
is OFF. If the preferred line is busy, the phone will use the
second line. This phone will dial the highlighted number up to
10 times, or until the phone is answered. If the called line is
busy, the phone will redial about every minute. You will hear the
number being dialed. When the call is answered, you MUST lift
the handset or press SPEAKER to talk.
Dialing a Number
1 Press the soft key below Dial.
The label changes to ADial.
2 Press the soft key below ADial.
To cancel automatic redial, press ADial again or lift the
handset or press SPEAKER.
Conference Call
You can use both lines at the same time to set up a three-way
conference call.
Making a
Conference Call
1 Make or answer a call.
2 Press HOLD.
3 Call someone on the other line.
4 Press CONF.
Ending a
Conference Call
Hang up. All parties will be disconnected.
NOTE: Under certain circumstances, the far-end
parties on a conference call might not hear one
another clearly.
2