AT&T 2255 Cordless Telephone User Manual


 
FEATURE SETUP
5
Feature Setup Menu
NOTE: When you follow the directions to “Clear Message Waiting”or
“Set Dial Mode”you change settings for both handsets. All other features
must be set separately at each handset.
Press S to enter the Feature Setup menu. Use < or > to choose
features, then press S to save your choice.
Press to return to the previous menu item.
NOTE: If you wait more than 20 seconds without pressing a key, the
handset returns to the standby screen.
Handset Volume
Adjusting handset volume will not affect the volume of what the other
party hears. Default setting is 2. You can also adjust volume during a
conversation by pressing < or >. You will hear a beep at each step up or
down. You will not hear a beep at the highest volume setting.
1 Press S. The screen displays
2 Press < until the screen displays
3 Press S. The screen displays
4 Use the keypad to enter a volume setting (0 7)
— OR —
Press < or > to display desired setting.
5 Press S to save displayed setting. You will hear a
confirmation tone.
>CALL LOG
PHONEBOOK
>HANDSET VOLUME
RING VOLUME
>HANDSET VOLUME