Filter
Top Products
If the system does not respond to commands from a remote touch
tone phone:
• Make sure you are calling from a touch tone phone. When you dial a
number,you should hear tones. If you hear clicks instead,the phone is
not a touch tone telephone.
• The answering system may not detect the Remote Access Code while
your announcement is playing. Try waiting until the announcement is
over before entering the code.
• Make sure you enter your Remote Access Code correctly.
• There may be noise or interference on the phone line you are using.
Press keys firmly.
If your outgoing announcement isn’t clear:
• When you record your announcement, make sure you speak in a
normal tone of voice, about nine inches from the base.
• Make sure there is no “background”noise (TV, music, etc.) while you
are recording.
IN CASE OF DIFFICULTY
30