AT&T 1480 Cordless Telephone User Manual


 
BEFORE YOU BEGIN
1
About the Base and the Charger
This product provides you with a base station with corded handset, a
cordless handset, and a handset charger. You’ll need to connect the base
to both AC power and a modular telephone jack. You’ll connect the
handset charger to AC power only. For more information, please see
INSTALLATION in this User’s Manual.
Choosing the Best Location
Choose a location for the base near an electrical outlet and a telephone
jack. This phone requires a modular telephone jack and a standard
electrical outlet (110v AC) not controlled by a wall switch. For optimum
performance, install the base on the highest floor of your home and away
from other cordless telephones.
NOTE: 2.4 GHz Digital Spread Spectrum telephones may cause
interference with this telephone.
About Caller ID with Call Waiting
This product has a Caller ID with Call Waiting feature that works with
service from your local phone service provider.
Caller ID with Call Waiting lets you see who’s calling before you answer
the phone, even when you’re on another call.
You may need to change your phone service to use this feature. Contact
your phone service provider if:
You have both Caller ID and Call Waiting, but as separate services
(you may need combined service)
You have only Caller ID service, or only Call Waiting service
You don’t subscribe to any Caller ID or Call Waiting services.
You can also use this product with regular Caller ID service, and you can use
this product’s other features without subscribing to either Caller ID or
combined Caller ID with Call Waiting service. To turn off this phone’s Caller
ID with Call Waiting feature, see the FEATURE SETUP section of this manual.
There are fees for Caller ID services, and they may not be available in all areas.
This phone can provide information only if both you and the caller are in
areas offering Caller ID service and if both telephone companies use
compatible equipment.
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 1