Filter
Top Products
11
Telephone Operation
10
Telephone Operation
Customizing your telephone
Choose dial mode
1 Press @PROG/CHAN to begin programming.
2 Press > until screen displays
DIAL MODE
& setting.
3 Press S to change current setting:
4 Press > to display TONE or PULSE.
5 Press S to select displayed dial mode and exit.
Choose language
1 Press @PROG/CHAN to begin programming.
2 Press > until screen displays
LANGUAGE
& setting.
3 Press S to change current setting:
4 Press > to display ENG., FRA., or ESP.
5 Press S to select displayed language and exit.
DIAL MODE: TONE
LANGUAGE: ENG.
Press
@PROG/CHAN
to begin programming
Press
<
or
>
to display
features one by one
Press
S
to modify a
displayed feature
To stop at any time, press
O
Customizing your telephone
Follow the steps below to program the telephone. To
stop at any time, press O. If the phone rings, program-
ming stops automatically so you may answer the call.
Choose ringer sound (see note on next page)
1 Press @PROG/CHAN to begin programming.
2 Press > until screen displays
RINGER
& setting.
3 Press S to change current setting:
4 Press > to display 1, 2, 3, 4, or OFF. You will hear
a sample of each ringing type.
5 Press S to select displayed ringing type and exit.
Set date and time
1 Press @PROG/CHAN to begin programming.
2 Press > until screen displays
DATE/TIME
.
3 Press S to view or change date and time:
4 Press < or > to change month, then press S.
5 Repeat Step 4 to set day, hour, minute, and AM/PM.
6 Press S to save selection and exit.
RINGER: 1
DATE/TIME
01/01 12:00
AM
NOTE:
You can choose to set the time manually, or you can allow it to
be set automatically with incoming Caller ID information. The time will be set
automatically only if you subscribe to Caller ID service provided by your local
telephone company (see page 5).
NOTE:
Base ringer volume can be set by adjusting the switch on the
side of the speakerphone base. This switch affects only speakerphone ringing
volume; the handset volume remains unchanged.
Default setting: 1
Default setting:
Monday, 12:00 am, 2000
Default setting: Tone
Default setting: ENG