Filter
Top Products
Software Activation
You will be asked to activate your new software when you open CoPilot on your
Pocket PC. Note that, unlike in previous versions, desktop activation is no
longer required. You can now open and use CoPilot’s desktop trip planning
software without activating it.
Keep your Pocket PC connected to your desktop and open CoPilot on your
Pocket PC. Follow the steps below to activate on your Pocket PC:
Automatic Activation
If your desktop is connected to the Internet
1. Connect your Pocket PC to your desktop via ActiveSync.
2. On your Pocket PC go to Start > Programs > CoPilot.
3. An activation screen will appear. Follow the on-screen instructions and
click Next.
4. In the next screen, enter your e-mail address and click Next. You will
see the message “License activated successfully” when the process is
finished. Click Next to begin using CoPilot.
Manual Activation
1. Connect your Pocket PC to your desktop via ActiveSync.
2. Make sure your desktop has an active connection to the Internet
3. On your Pocket PC go to Start > Programs > CoPilot.
4. An activation screen will appear. Check Activate Manually and tap
Next.
5. The next screen is the Activation Code screen where you'll see your
Product Key and License ID. You'll need this information to manually
activate CoPilot as follows:
a. On your desktop visit ALK's activation web page
(http://activate
.alk.com)
i. On the ALK activation page enter your Product Key, License
ID and e-mail address, then click Submit. Your Activation
Code will appear on-screen and an e-mail that contains your
Activation Code will be sent to you.
ii. Enter your Activation Code in the blank field in the Activation
Code screen and click Activate.
b. If you do not have internet access you can call, fax or e-mail ALK.
Technical support is available to registered users during standard
business hours. See Technical Support,p.93.
NOTE: Software activation does NOT register your software, they are two
different processes. See Software Registration,p.92.
Deactivation and License Update
If you’re planning to uninstall CoPilot from one
Pocket device and install the same version on
another device, you need to deactivate the software
on the first device before installing it again. To do
this, open CoPilot on your Pocket PC. If you can’t
see the menus and toolbar, tap at the top or bottom
of the screen. Tap the Tools menu, select Update
License, then tap Deactivate in the License
Manager. Your Pocket PC must be synchronized for
the deactivation process to take effect. When you
re-install CoPilot on another device, you will be
asked to activate it again.
Speech Volume
To hear CoPilot’s voice prompts, the volume on your Pocket PC must be turned all
the way up. In the Pocket PC Start menu, go to Settings and tap on Sounds and
Notifications. Under System Volume, move the slide bar all the way to the right.
Or use your Pocket PC’s keypad when CoPilot is open: tap up until you reach the
maximum volume.
If you installed the TTS (text to speech) voice option, you may also want to
make sure the “Amplify Speech Volume” option is on — tap the Tools menu
(if you don’t see it, tap at the top or bottom of the screen), select Options, and
tap the Guidance tab. This option should be checked.
- 12 -- 11 -