Filter
Top Products
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-154 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Parameter –
topsoftkeyN value
Top Softkeys->Value
(In WEb UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the softkey.
The “topsoftkeyN value” parameter can be set for the following softkey
types only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
•BLF
• sprecode
•Park
•Pickup
•dcp
•XML
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the softkey.
2. For blf - Value is the extension you want to monitor.
3. For sprecode - Value is dependent on services offered by server.
4. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-157. For
Park/Pickup examples, see Chapter 5, the section, “Model 57i/57i CT
Examples” on page 5-155.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$INCOMINGNAME$$
Format Integer
Default Value Not Applicable
Range N/A
Example topsoftkey1 value: 9
topsoftkey2 value: 411
topsoftkey4 value: http://10.50.10.140 script.pl?name=$$SIPUSERNAME$$
topsoftkey5 value: 12345+ (example of a speeddial prefix)