Filter
Top Products
Operational, Basic, and Advanced Parameters
A-98 41-001160-00, Release 2.1, Rev 04
IP Phone Administrator Guide
Appendix A
Incoming Call Interrupts Dialing Setting
Parameter –
incoming call interrupts
dialing
Incoming Call Interrupts
Dialing
(in Web UI)
Aastra Web UI: Basic Settings->Preferences->General
Configuration Files aastra.cfg, <mac>.cfg
Description Enable or disables how the phone handles incoming calls while the phone
is dialing out.
When you enable this parameter (1 = true), an incoming call interrupts the
outgoing call during dialing and allows the phone to ring for the user to
answer the incoming call.
When you disable this parameter (0 = false), which is the default, the
phone does not interrupt the outgoing call during dialing and instead rings
the incoming call on another free line (or sends busy signal if all
remaining lines are busy). You have a choice to ignore the incoming call,
or answer the incoming call on another line, via the Ignore and Answer
softkeys that display. If you choose to answer the incoming call, you can
answer the call, finish the call, and then hang up. You can still go back to
the original outgoing call and finish dialing out.
Notes:
1. On a 53i, you must use the up and down arrow keys to ignore or
answer the call.
2. On all phone models, if you disable this parameter (0=disable), and the
phone receives an incoming call while you are dialing an outgoing call,
you can pick up the call and perform transfer or conference as required.
After enabling or disabling this feature, it takes affect on the phone
immediately.
Format Boolean
Default Value 0 (false)
Range 0 (false)
1 (true)
Example incoming call interrupts dialing: 1