Filter
Top Products
Model 53i IP Phone User Guide 33
Programmable Keys
Setting Park/Pickup Keys
The 53i phone has a park and pickup call feature that allows you to park a
call and pickup a call when required.
The IP phones support the Park/Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ PBX servers.
You can set the programmable keys on the 53i to use the park/pickup
feature by setting a programmable key as "Park" or "Pickup" and then:
•specify a value
• specify a line to use
Note: The values you enter for each softkey are dependent on the type of server you
are using (Asterisk, BroadWorks, Sylantro, or ININ PBX).
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the
applicable "Park" programmable key to park the call.
• After the call is parked, you can press the "Pickup" programmable key,
followed by the applicable value to pickup the call.
You configure a Park and Pickup programmable configuration using the
Aastra Web UI.
The following table provides the values you enter for the "Park Call" and
"Pickup Parked Call" fields in the Aastra Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup