Filter
Top Products
30 Aastra MBU 400 User Guide
Customizing Your Phone
Customizing Your Phone
Changing the Handset Name
After handsets register with the gateway, the default names assigned to each handset
are Handset 1, Handset 2, Handset 3,.........up to Handset 8.
If required, you can assign a name to your handset to identify your handset from any
other handsets registered with the same gateway.
For more information about entering text, numbers, and symbols, see the section, Text
Input Modes on page 31.
To change the handset display name do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select
Settings and press OK z.
3. Select
System Settings, and press OK z.
4. Select
Handset Settings, and press OK z.
5. Select
Handset name, and press OK z.
6. Press the * key to toggle the input mode for entering characters.The input mode
you select displays in the upper right corner on the screen. Press the
Options
softkey and select the
Insert symbol option to insert symbols if required.
7. Enter the handset name using the keypad on the phone.
8. Press OK z, and press the
Yes softkey at the save prompt.
Note: Before saving the new handset name, you can cancel at any time by pressing
the red key and pressing the
Yes softkey at the discard prompt. The handset
name returns to its previous setting.
Entering Text, Numbers, and Symbols
The handset interface allows you to perform several options to customize your phone,
some of which require you to enter text and numbers on the handset screen. This
section describes how to enter text and numbers on your phone.
When in an option requiring you to enter or edit text or numbers (for example when
adding contacts to the Contacts List), the following softkeys display for your use:
The
Erase softkey enables you to backspace and erase characters that was just
entered.
The
Options softkey provides you with the following two options:
Input mode
Insert symbol
CLR
CLR