Filter
Top Products
10 Aastra MBU 400 User Guide
Safety Information
Safety Information
Important Safety Information
Charge the battery or handset only in combination with 420d Charger and the
SALOM SSW-1444 adapter that comes with the product. Plug the SALOM SSW-
1444 AC/DC adaptor in a wall outlet socket near the equipment for easy access/
removal of the AC/DC adaptor.
Important Battery Information
This product uses rechargeable Lithium-ion batteries 3.7V, 650mAh. Only use
batteries that come with the handset or dedicated spare batteries marked with “Battery
Pack 3.7V 650mAh Li-ion”. Do not use any other type, since this may present a risk
of leakage, fire, explosion or other hazardous situation. For battery replacement or
removal please remove the battery cover of the handset. Never disassemble,
customize or short-circuit batteries. Do not place battery in fire or heat the battery.
Charge the battery or handset only in combination with 420d Charger and the
SALOM SSW-1444 adapter that comes with the product.
Sensitive Electronic Environment
Any radio-based equipment can potentially cause interference with other equipment
and can be interfered from other equipment. This also applies for DECT equipment.
However due to the very low transmission power level the chances for interference
are very small. Research proves that operational DECT phones normally don’t
influence electronic equipment however some precautions must be taken into account
for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT
phones operate in straight nearness of sensitive electronic equipment incidental
influence can appear. You are advised not to place the DECT phone on or close (less
than 10cm) to this kind of equipment, even in standby mode. Please also use the other
documentation supplied with the various parts of your telephone system.
Product Disposal Information
For countries in the European Union
The symbol depicted here has been affixed to your product in order to
inform you that electrical and electronic products should not be disposed
of as municipal waste.
Electrical and electronic products including the cables, plugs and accessories should
be disposed of separately in order to allow proper treatment, recovery and recycling.
These products should be taken to a designated facility where the best available
treatment, recovery and recycling techniques are available. Separate disposal has
significant advantages: valuable materials can be re-used and it prevents the
dispersion of unwanted substances into the municipal waste stream. This contributes
to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and
electronic products via the general municipal waste stream. In order to facilitate
separate disposal and environmentally sound recycling, arrangements have been
made for local collection and recycling. In case your electrical and electronic products
need to be disposed of please refer to your supplier or the contractual agreements that
your company has made upon acquisition of these products.