MEMORY CARD INSTALLATION
• Kidizoom
®
Camera Connect supports the below memory cards for
memory expansion.
• Make sure the camera is turned OFF.
• Locate the memory card slot at the
bottom of the camera.
• Pull up the rubber cover.
• Insert the memory card (not included)
as illustrated. Once the memory card
is detected and can be used, the
default memory will set as the memory
card automatically.
• To remove the memory card from the
slot, push the card once and it will eject.
Note: If a memory card is being used, data stored in the internal memory
cannot be seen in the camera unless the memory card is removed. To
prevent accidental data loss, make sure you have backed up all important
data from your memory card before using.
TO BEGIN USING
KIDIZOOM
®
CAMERA
CONNECT
• Press the ON/OFF Button to turn on the camera.
• If it is the rst time that you are turning on the Kidizoom
®
Camera Connect,
you will see an option to select the date and time. Press the Up or Down
Cursor Button to select the correct day, month, year, hour, and minute.
Press the Left or Right Cursor Button to jump to the previous or the
next setting item. Finally, press the OK button to conrm the setting. If
you wish to change the date & time later, please go to Settings.
• After the date and time is set, when Kidizoom
®
Camera Connect is turned
on, it will go directly into camera mode and you can start taking photos.
To Begin Using Kidizoom
®
Camera Connect
microSD Logo and microSDHC Logo are trademarks of SD-3C,LCC.
microSD
microSDHC