13 14
1) Align the belt clip to the mounting rails on the
back of the radio.
2) Slide the belt clip downward until it locks into
place.
To remove the belt clip - lift the lever at the top
of the clip while pulling the belt clip upward.
NOTE: The belt clip must be removed to install
batteries into the radio.
NOTE: The GMRS-310 requires 4 AAA batteries
(not included). The radio must be powered OFF
before installing or removing batteries.
NOTE: After removing the belt clip, open the battery
compartment cover using the steps below.
8. Belt Clip Attachment 9. Battery Installation
1. Push down on the top
center of the battery
compartment cover and
slide away from the
radio.
3. Insert 4 AAA batteries.
Match the battery polarity
with the design within the
battery compartment.
2. Lift the battery compart-
ment cover off.
4.
Align the battery compart-
ment cover to the rails on
radio and slide forward
until cover snaps into
place.
