A SERVICE OF

logo

33
Setup with the Provided "Panasonic IP Setup" Software
Set up the network of the encoder/decoder by using the "Panasonic IP Setup" software included on the provided CD-
ROM.
Note: If a firewall (including software) exists, allow access to all UDP ports. Otherwise, it is impossible to use the
"Panasonic IP Setup" software.
Items included in the software
IPSETUP (Panasonic IP Setup)
Operating Instructions (pdf file)
1. Double click the "IPSETUP" icon.
The "Panasonic IP Setup" starts up.
The MAC address and the IP address of the connected encoder/decoder will be displayed. (Click the [REFRESH]
button if they are not displayed.)
2. Click the MAC address/IP address of the
encoder/decoder to be set up.
3. Click the [NETWORK SETUP] button.